View cart

PUNCTURE REPAIR

For minor repairs,

 if you are using Stabond and Methyl Ethyl Ketone (MEK), clean the surface to be patched and the patch itself with Methyl Ethyl Ketone until all dirt and oxidation is removed (the shiny material should show through).

Apply the first coat of adhesive immediately, brushing it evenly on each surface. Allow it to dry for 20 minutes before applying the second coat. When the second coat is dry, reactivate both surfaces with Methyl Ethyl Ketone. When aggressively tacky (like duct tape), assemble and apply pressure using a smooth hard object. If no Methyl Ethyl Ketone is available, the patch may be applied when the second coat is tacky. Rub thoroughly for superior bonding. If you are repairing a rip of over five inches we suggest that you patch both inside and outside. The size of the patch should be at least two inches larger than the rip in all directions. Most importantly, keep the surfaces dry at all times. We recommend that you let the patch dry 1 hour for on river repairs and for a permanent patch you will need to let it set 24 hours. 

If you have glue and MEK in your patch kit, remember to check them over every season as the glue can harden usually after 1-2 seasons and the MEK will evaporate. You can get fresh glue and MEK from SOTAR or from Northwest River Supply (nrs.com). 

For pinholes, scratches, and minor leaks Tear-Aid will suffice until you can get your inflatable in for a professional repair. 

  • MEK can be shipped GROUND to all states expect HI, AK, Porto Rico. It can't be shipped outside the USA.
  • THF can't be shipped (pick up only)
  • Stabond glue can be shipped GROUND to all states expect HI, AK, Porto Rico. It can't be shipped outside the USA.
  • Liquid Lex can't be shipped (pick up only)

Have any questions, please feel free to contact us at service@sotar.com